Compensator for Walther PDP Pro SD – Choice of colors

Description

A custom part for your PDP 9×19 threaded pistol

Our compensator for Walther PDP Pro SD features 3 vents. It redirects the blast 50% to the top, 25% to the left and 25% to the right. The result is a stabilized shot and greatly reduced recoil. It’s the ideal custom accessory for all shooters looking for greater speed and comfort.

Made entirely from aeronautical aluminum, this muzzle brake weighs just 33 grams. So it won’t affect the balance of your pistol, nor will it interfere with its cycling. We’ve also developed it to work with all 9×19 ammunition.

Note the bevelled lip on the rear face, concealing the gap between slide and muzzle brake. Being efficient is good, but being elegant is always a good bonus.

Installing the compensator for Walther PDP Pro SD

This muzzle brake fits directly onto the 1/2×28 TPI thread at the end of your barrel. As this is a directional accessory, it must be indexed. Proceed as follows:

1. First, separate the slide from the frame of your PDP, remove the recuperator spring and move the barrel forward a few centimetres.
2. Screw the accessory onto the end of the barrel as far as it will go.
3. Move the barrel back into its firing position, while unscrewing the compensator by the number of degrees required to give it the desired orientation (large vent upwards), and it will center itself in the correct position.
4. Replace the recuperator spring.
5. Lock the position of the muzzle brake for Walther PDP Pro SD with the two small Allen screws that diagonally dip below, using a 1.5 mm Allen key (not supplied).
6. Finally, replace the equipped barrel/slide assembly on the gun and check that the pistol functions correctly when empty.

It’s simple, reversible, and works with all original components. No need to change your recoil spring or barrel.

Which variants are compatible?

Our compensator for Walther PDP Pro SD fits the following models:

• PDP Pro SD Compact 4.6″ (# 2844176)
• PDP Pro SD Full size 5.1″ (# 2842521)
• PDP Pro SD Compact 4.6″ Two Tone Gray (# 2876574)
• PDP Pro SD Full size 5.1″ Two Tone Gray (# 2877503)
• PDP Pro SD Compact 4.6″ Two Tone Tan (# 2877520)
• PDP Pro SD Full size 5.1″ Two Tone Tan (# 2876582)

If yours is on the list, go for it! We ship all over the world.